Non-Fading Output (Non Fad E -1); Non-Fading Output Level Adjustment - Pioneer DEH-P8100R Operation Manual

Audio Adjustment
Non-Fading Output (Non Fad
When the Non-Fading Output setting is ON, the audio signal does not pass through this
unit's low pass filter (for the Subwoofer), but is output through the RCA output.
Note:
• When the Subwoofer Controller setting is only "Sub woofer control External", you can switch the
Non-Fading Output ON/OFF mode. (Refer to page 57.)
1. Press the AUDIO button and select the Non-Fading Output ON/OFF
mode (Non Fad
2. Switch the Non-Fading output
ON/OFF with the 5/∞ but-
tons.
Non-Fading Output Level Adjustment (Non Fad
When the Non-Fading output is ON, you can adjust the level of Non-Fading output.
1. Press the AUDIO button and select the Non-Fading Output setting mode
(Non Fad -2) in the Audio Menu.
E
2. Increase or decrease the output
level with the 5/∞ buttons.
The display shows "0" – "–15".
Note:
• You can select the Non-Fading Output setting mode only when Non-Fading output is switched ON
in the Non-Fading Output ON/OFF mode.
49
-1)
E
-1) in the Audio Menu.
E
-2)
E