Dubbing only desired scenes - Digital program editing
(10)Turn the SEL/PUSH EXEC dial to select "CUT-IN," then press the dial.
(11)Turn the SEL/PUSH EXEC dial to select the average numerical value of CUT-IN,
(12)Turn the SEL/PUSH EXEC dial to select "CUT-OUT," then press the dial.
(13)Turn the SEL/PUSH EXEC dial to select the average numerical value of CUT-OUT,
(14)Turn the SEL/PUSH EXEC dial to select
Errors in editing
If you connect your camcorder to Sony equipment with the DV jack, the range of errors
is within +/– 5 frames.
The range may become wider in the following conditions:
•The interval between CUT-IN and CUT-OUT is less than five seconds (p. 77).
•CUT-IN or CUT-OUT is set at the beginning of the tape.
76
then press the dial.
The calculated start position for recording is set.
then press the dial.
The calculated stop position for recording is set.
RETURN, then press the dial.
10,11
OTHERS
ED I T SET
ADJ TEST
"CUT–I N"
0
"CUT–OUT"
RETURN
[ MENU ] : END
12,13
OTHERS
ED I T SET
ADJ TEST
"CUT–I N"
"CUT–OUT"
0
RETURN
[ MENU ] : END
OTHERS
ED I T SET
ADJ TEST
"CUT–I N"
0
"CUT–OUT"
RETURN
[ MENU ] : END
OTHERS
ED I T SET
ADJ TEST
"CUT–I N"
"CUT–OUT"
0
RETURN
[ MENU ] : END