Searching The Boundaries Of Recorded Tape By Title - Title Search - Sony DSR-PD150 Operating Instructions Manual

Searching the boundaries of recorded
tape by title – Title search
(1) Set the POWER switch to VCR.
(2) Set CM SEARCH in
is ON.
(3) Press SEARCH MODE on the Remote Commander repeatedly, until the title
search indicator appears.
The indicator changes as follows:
INDEX SEARCH t TITLE SEARCH t DATE SEARCH t PHOTO SEARCH
t PHOTO SCAN t no indicator
(4) Press . or > on the Remote Commander to select the title for playback.
Your camcorder automatically starts playback of the scene having the title that
you selected.
1
POWER
To stop searching
Press x.
If you use a tape without cassette memory
You cannot superimpose or search for a title.
In the
•The bar in the
•The
If a tape has a blank portion between recorded portions
The title search function may not work correctly.
66
If you use a tape with cassette memory, you can search for the boundaries of
recorded tape by title (Title search) (p. 142). Use the Remote Commander for
this operation.
to ON in the menu settings (p. 104). The default setting
mark
mark indicates the present point on the tape.
mark in the indicates the actual point you are trying to search for.
3
TITLE SEARCH
1
SEARCH
2
MODE
3
4
5
6
4
TITLE SEARCH
3
4
5
6
7
8
SCENE1
SCENE2
SCENE3
SCENE4
SCENE5
SCENE6
SCENE3
SCENE4
SCENE5
SCENE6
SCENE7
SCENE8