Sony DSR-PD150 Operating Instructions Manual page 38

Using the fader function
(1) When fading in [a]
(2) Press START/STOP. After the fade in/out is carried out, your camcorder
1
To cancel the fader function
Press FADER until the indicator disappears.
Note
You cannot use the following functions while using the fader function, and vice versa:
– Digital effect
– Tape Photo recording
– Interval recording
– Cut recording
When the OVERLAP, WIPE, or DOT indicator appears
Your camcorder automatically stores the image recorded on a tape. As the image is
being stored, the fader indicator flashes fast, and the playback picture appears.
38
In standby mode, press FADER until the desired fader indicator flashes.
When fading out [b]
In recording mode, press FADER until the desired fader indicator flashes.
The indicator changes as follows:
FADER t MONOTONE t OVERLAP t WIPE t DOT t no indicator
The last selected fader mode is indicated first.
automatically returns to the normal mode.
FADER
FADER
2
POWER