Vehicle; Using A Child Restraint With A Built-In Harness; With A Vehicle Lap Or Lap/Shoulder Belt - Graco Nautilus Owner's Manual

10.0 Securing the Child Restraint in Your Vehicle
TURN, SUDDEN STOP OR CRASH. Carefully follow these instructions and those in your vehicle
owner's manual to be sure your child restraint is properly positioned and held tightly at all times.
10.1 Using Child Restraint WITH Built-in Harness

10.2 With a Vehicle Lap or Lap/shoulder Belt:

Lower anchors must be stored when using vehicle belt.
See Section 18.1, Storing UAS, page 56.
1. Place the child restraint firmly against the back of a
forward-facing vehicle seat.
2. Thread the seat belt through the belt slot openings:
3. Buckle the vehicle belt. The vehicle belt should not be
twisted.
FAILURE TO PROPERLY SECURE THE CHILD RESTRAINT IN
THE VEHICLE INCREASES THE CHILD'S RISK OF
SERIOUS INJURY OR DEATH IN THE EVENT OF A SHARP
For Lap/Shoulder belt
For Lap-only belt
32