Bar Code Configuration Methods; Single-Code Method; Multi-Code Method - Honeywell ms 7820 Solaris User Manual

Bar Code Configuration Methods

B C C
AR ODE ONFIGURATION
Metrologic scanners can be bar code configured in two ways: the Single-Code Method
and the Multi-Code Method.

Single-Code Method

Most features can be enabled or disabled using the Single-Code Method.
1. Power up the scanner.
2. Scan the bar code(s) for the desired feature(s).
3. Observe a multi-toned, "save setting" beep that indicates the configuration has
been saved to NOVRAM.

Multi-Code Method

All features can be enabled or disabled using the Multi-Code Method.
A feature marked with a "~" requires the Multi-Code Method.
1. Power up the scanner.
2. Scan the Enter/Exit Configuration Mode bar code. [3 beeps]
3. Scan the bar code(s) for the desired feature(s). [1 beep]
4. Scan the Enter/Exit Configuration Mode bar code [3 beeps] and
save new configuration.
To abort a configuration change, power off the scanner before scanning the
Enter/Exit Configuration Mode bar code.
xii
M
ETHODS
Enter/Exit Configuration Mode
³ 9 9 9 9 9 9