Installation and Connection
Installation and Connection
HDMI Digital Interface Connection
Use the HDMI digital signal cable (optional) to connect the external HDMI high-definition signal
source to the HDMI digital input interface on the
TV. Press SOURCE to select the signal source
"
"
"
HDMI
-1" or "HDMI-2"
Video 1/Video 2 Signal Connection
Use the composite cable to connect the video
and audio output interfaces on the AV device
respectively to the video and audio input
interfaces on the TV.
S-VIDEO nput
I
C
onnection
Through S-VIDEO/AUDIO cables to connect
external AUDIO/VIDEO equipment to the
machine's AUDIO/VIDEO input port, and press "SOURCE" key to select "SV" si
YPbPr/YCbCr Input Interface Connection
If the signal source comes from a DVD player, set-top box or device with YPbPr/YCbCr output
interface, you are recommended to connect the YPbPr/YCbCr output interface to the YPbPr/YCbCr
input interface on the TV for a better image quality. Meanwhile, please connect the audio output
interface to the audio input interface on the TV. See the figure below. To select the YPbPr/YCbCr
signal, please set the input signal source to be component mode.
AV Output Connection
Use the audio/video cable to connect the TV audio/video output interface to another monitor to
watch the TV programs synchronously.
SPDIF-OUT:
The SPDIF audio output interface can transmit digital audio signal instead of traditional
analog signal via optical fiber and thus achieve a better sound effect. Please use the optical fiber
connection cable to connect it to the device with a SPDIF digital input interface, like your audio
power amplifier.
Earphone jack: when you insert the earphone into the earphone jack, there will be no sound
from the TV speaker.(Please adjust the volume to a suitable
to affect the hearing.)
SERVICE: USB interface (It's used only for software upgrade).
.
Digital audio output
Earphone jack
USB interface
sound level
7
R
Red (AUDIO-R)
W
White(AUDIO-L)
R
Y
Yellow (VIDEO)
W
Y
AV Device
(like DVD, VCR, Game Console...)
gna
l source.
, to avoid sounds excessive