Table of Contents
Advertisement
General Operating Instructions
Auto Scan
Press [▼] to move the cursor to select "Auto Scan", press [u
] or [OK] to enter the menu "Auto
Channel Scan", press [t
] or [u
] to select "Yes", and press [OK] to start auto scanning . When
scanning is finished, it will stop at the channel where auto scan begins.
Friendly Tips: Please select Auto Scan for a new product. The system will auto scan channels in
your area. Please wait a few minutes for auto scan, do not disconnect the power or turn off the TV.
Favorite
Press [▲] or [▼] to move the cursor to select "Favorite" and then press [u
] or [OK] to enter the
menu "Favorite List". Press [▲] and [▼] to select a channel as your favorite channel, then press
[OK], the channel which you selected will be added to the "Favorite channel list". It is enable only
when memorise channels.
Show/Hide
Press [▲] or [▼] to move the cursor to select "Show/Hide" and then press [u
] or [OK] to enter the
menu "Show/Hide". Press [▲] and [▼] to select a channel, then press [OK], the channel which you
selected will hide.
Channel No.
Press [▲] or [▼] to move the cursor to select "Channel No ." and then press [t
] or [u
] to select
Channel. It is enable only when memorise channels.
Channel Label
Press [▲] or [▼] to move the cursor to select "Channel Label" and then press [u
] or [OK] to enter
the menu "Channel Label", press [▲] or [▼], [t
] or [u
] to edit channel label. It is enable only when
memorise channels.
DTV Signal:
DTV signal information, it is enable only when memorise channels.
17
Advertisement
Table of Contents
