Jeep 2009 Commander Owner's Manual page 69

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67
If your child seats are not LATCH-compatible, you can
only install the child seats using the vehicle's seat belts.
For typical installation instructions, refer to "Installing
2
the LATCH-Compatible Child Restraint System".
Installing the LATCH-Compatible Child Restraint
System
We urge that you carefully follow the directions of the
manufacturer when installing your child restraint. Not all
child restraint systems will be installed as described here.
Again, carefully follow the installation instructions that
were provided with the child restraint system.
Latch Anchorages
The rear seat lower anchorages are round bars, located at
the rear of the seat cushion where it meets the seatback,
and are just visible when you lean into the rear seat to
install the child restraint. You will easily feel them if you
run your finger along the intersection of the seatback and
seat cushion surfaces.