Jeep 2009 Commander Owner's Manual page 431

Hide thumbs Also See for 2009 Commander:

Table of Contents

Insert a finger into each hole of the headlamp cover, and

pull upward to unsnap the rear edge of the cover from

the two upper lamp mounting brackets. Slide the cover

rearward to disengage the front edge from beneath the

tab on the top near the front of the lamp housing.

3. Disconnect the electrical connector.

MAINTAINING YOUR VEHICLE 429

4. Turn the low or high beam bulb 1/4 turn counterclock-

wise to unlock it from the housing.

1 — Low Beam Bulb

2 — High Beam Bulb

3 — Front Park/Turn Signal Bulb

Chapters

Table of Contents