Changing The Monitor Settings - Fujitsu Siemens Computers SCENICVIEW P996-1 Operating Manual

Colour Monitor SCENICVIEW P996-1

Changing the monitor settings

The monitor display is adjusted with the buttons of the control panel.
1 = Exit button
Menu button The menu button switches on the OSD menu and activates the selected function.
When the menu is activated, mark the symbol for the topic or function you want to
65
set with the buttons
When the menu is not activated, these buttons have not function.
When the menu is activated, set the values for the selected function with the
34
buttons
When the menu is not activated, you can display the setting window for brightness
and contrast directly with the buttons
Exit button The Exit button deactivates the OSD menu or returns you from a submenu to its
superior menu.
Setting functions with OSD menu
To make a setting for a function, perform the following steps:
► Press the Menu button to activate the OSD menu.
The OSD menu is displayed on the screen.
On the left-hand side of the OSD menu the symbols for the individual topics
are displayed. On the right-hand side of the OSD menu the respective
functions are displayed which belong to the individual topics.
► Select the symbol for the topic that contains the desired function with the buttons
► Press the Menu button to select the marked topic.
12 - English
Downloaded from ManualMonitor.com Manuals
Exit
2
1
2 = Arrow buttons
and
6 5
and .
3 4
Menu
3
3 = Menu button
.
and .
3 4
A26361-K967-Z100-1-5E19,
4
4 = ON/OFF switch
or .
6 5
Edition 1