Power Cable; Energy Star Guidelines; Ce Marking - Fujitsu Siemens Computers SCENICVIEW P996-1 Operating Manual

Colour Monitor SCENICVIEW P996-1

Power cable

To guarantee safe operation, use the cable supplied. Use the following guidelines if it is necessary
to replace the original cable set.
● The female/male receptacles of the cord set must meet CEE-22 requirements.
● The cable has to be HAR-certified or VDE-certified. The mark HAR or VDE will appear on the
outer sheath or on the insulation of one of the inner conductors.
● For devices which are mounted on a desk or table, type SVT or SJT cable sets may be used.
For devices which sit on the floor, only SJT type cable sets may be used.
● The cable set must be selected according to the rated current for your device.

Energy Star Guidelines

The EPA estimates that computer equipment uses 5 % percent of all business electricity and that
this is growing rapidly. If all desktop computers and peripherals enter a low-power mode when not in
use, the overall savings in electricity could amount to $ 2 thousand million annually. These savings
could also prevent the emission of 20 million tons of carbon dioxide into the atmosphere - the
equivalent of 5 million automobiles.
As an Energy Star Partner, Fujitsu Siemens Computers GmbH has determined that this product
meets the Energy Star guidelines for energy efficiency.

CE marking

The shipped version of this device complies with the requirements of the EEC
directives 89/336/EEC "Electromagnetic compatibility" and 73/23/EEC "Low voltage
directive".
4 - English
Downloaded from ManualMonitor.com Manuals
The Fujitsu Siemens colour monitor SCENICVIEW P996-1 is designed to
conserve electricity by dropping to less than 1 W when it goes OFF mode.
With this new power management the SCENICVIEW P996-1 qualifies for
the U.S. Environmental Protection Agency's (EPA) Energy Star
Computers award.
A26361-K967-Z100-1-5E19,
Edition 1