Ford Mustang 2013 Owner's Manual page 28

Hide thumbs Also See for Mustang 2013:
Table of Contents

Advertisement

28
The LATCH system is composed of three vehicle anchor points: two (2)
lower anchors located where the vehicle seat back and seat cushion meet
(called the seat bight) and one (1) top tether anchor located behind that
seating position.
LATCH compatible child safety seats have two rigid or webbing mounted
attachments that connect to the two lower anchors at the LATCH
equipped seating positions in your vehicle. This type of attachment
method eliminates the need to use safety belts to attach the child seat,
however the safety belt can still be used to attach the child seat. For
forward-facing child seats, the top tether strap must also be attached to
the proper top tether anchor, if a top tether strap has been provided with
your child seat.
Follow the instructions on attaching child safety seats with tether straps.
Refer to Installing child safety seats with tether straps later in this
chapter.
Attach LATCH lower attachments of the child seat only to the anchors
shown.
2013 05+ Mustang (197)
Owners Guide gf, 1st Printing
USA (fus)
Child Safety
Your vehicle has LATCH lower
anchors for child seat installation at
the seating positions marked with
the child seat symbol.
The LATCH anchors are located at
the rear section of the rear seat
between the cushion and seatback
below the symbols as shown. Follow
the child seat manufacturer's
instructions to properly install a
child seat with LATCH attachments.

Advertisement

Table of Contents
loading

Table of Contents