Ford Mustang 2013 Owner's Manual page 246

Hide thumbs Also See for Mustang 2013:

Table of Contents

Replacing rear sidemarker lamp bulbs

1. Make sure the headlamp switch is in the off position and locate the

sidemarker on the rear bumper fascia.

2. Insert a flathead screwdriver between the rear of the sidemarker lens

and the bumper fascia.

3. Push the screwdriver to the front of the vehicle and then slide it

towards you to pop out the lamp assembly.

Replacing license plate lamp bulbs

1. Make sure the headlamp switch is in the off position.

2013 05+ Mustang (197)

Owners Guide gf, 1st Printing

4. Carefully pull the bulb straight

out of socket.

Install the new bulb in reverse

2. Remove the two screws and the

lens from the license plate lamp

3. Carefully pull the bulb straight out

from the lamp assembly.

Install new bulb(s) in reverse order.