Lifescan OneTouch Owner's Booklet page 48

Before setting the time, you must first set the date.
Note: Your OneTouch
average which you can access from the meter memory. This
average is calculated from results obtained during the 14 days
preceding the current date and time settings. When the date
and time are changed, the 14-day average may change.
Set the Hour.
STEP 4
Press and release the C button to
advance one hour. To move faster, hold
the C button down. With the correct hour
(with AM or PM) on the display, press the
M button and the minutes setting will start
flashing.
Set the Minutes.
STEP 5
Press and release the C button to
advance one minute. To move faster, hold
the C button down. With the correct
minute on the display, press the M button
and the current unit-of-measurement
setting will appear.
® ®
FastTake Meter displays a 14-day
38