Lifescan OneTouch Owner's Booklet page 29

® ™
Replace the OneTouch UltraSoft Cap. Turn
the cap clockwise until it is snug but not too
tight.
Adjust the puncture depth setting if
necessary. Twist the knob counterclockwise,
toward the smaller bumps for a shallower
puncture. Twist the knob clockwise, toward
the larger bumps for a deeper puncture.
STEP 2
Cock the Sampler.
Slide the ejection/cocking control backward
until it clicks. If it does not click, the sampler
may have been cocked when the lancet was
inserted.
19