Transmitted Data - Korg POLYSIX M Owner's Manual

POLYSIX-M V2.1 MIDI IMPLEMENTATION

1) TRANSMITTED DATA

(A), (B), (C), or (D) means that the messages are only transmitted when the respective output filters are enabled:
(A) - note data
(B) - wheel data
(C) - program change
(D) - sustain pedal / chord memory pedal
nnnn is the midi output channel;
x is don't care
A) Voice Messages:
1001 nnnn 0kkk kkkk
1100 nnnn 0ppp pppp
1011 nnnn 0000 0001
1011 nnnn 0100 0000
1011 nnnn 0100 0100
1011 nnnn 0111 1011
1110 nnnn 0LLL LLLL
22
0vvv vvvv Note on/off (A)
Program change (C)
Note: The programs are arranged in the following order:
Pgm. chg. no
Pgm. chg. no
..
Pgm. chg. no 24 - 31: Group 1:Bank D:Programs 1..8
Pgm. chg. no 32 - 39: Group 2:Bank A:Programs 1..8
..
Pgm. chg. no112 - 127: Group 4:Bank D:Programs 1..8
0vvv vvvv Control change
0vvv vvvv Control change
0vvv vvvv Control change
Note: Only one of sustain pedal/ch mem pedal will be transmitted,
depending on the setting of the CH MEM Pedal parameter.
0000 0000 Control change
Note: All notes off is transmitted:
A) When arpeggiator is stopped or started
B) When output channel is changed and (A) is enabled
C) When output filter (A) is turned off
0hhh hhhh Pitch bend (B)
Note: LSB is 0 if MSB<65, LSB=2*(MSB-64) if MSB>64
(18.Mar.2000)
Note number (36..96)
Pgm. number
(0..127)
0 - 7: Group 1:Bank A:Programs 1..8
8 - 15: Group 1:Bank B:Programs 1..8
Mod wheel; no 1 (B)
Sustain pedl;no 64(D) Value (0=off; 127=on)
ChMem pedl;no70(D) Value (0=off; 127=on)
All notes off (A)
LSB
Velocity (64=on;0=off)
Value (0..127)
MSB