The Save Procedure - GEM PK5 Owner's Manual

The Save procedure

1. Have newly formatted disk or a used disk ready.
If the disk is write protected, remove the protection (see page 68).
2. Press the DISK button and, with the cursor buttons, move the arrowhead to the right of the display until is it shown
next to the SAVE disk function.
The display shows the first page relating to the SONG file type.
3. Use the PAGE buttons to select the other file types: (Midifile, Style, Styles, Perf, Sample, ALL).
4. After selecting the file type (e.g. SONG), press ENTER.
The display shows the name of the first Song contained in the instrument's RAM. Rotate the DIAL or use
the + and – buttons of the Sound selection keypad to select the Song you wish to save.
5. After selecting the Song, press ENTER.
The display shows the name of the selected song, ready to be saved to disk.
If you don't rotate the DIAL, you can save the file to disk with the original name.
If you rotate the DIAL, the displayed name will be lost the display will show the names of the files contained
in the disk (if present). In this case, you must write a name for the file being saved using the standard name
entry method.
6. Press ENTER.
You are prompted with the word SURE?, or OverWrt? (if the disk already contains a file with the same
name).
7. Press ENTER to save the file to disk.
Note: If the disk drive contains an unformatted disk, pressing SAVE prompts the message "UNFORMAT".
If the disk is protected, pressing SAVE prompts the message, "PROTECTED".
If the disk is damaged, pressing SAVE prompts the message "CORRUPTED".
; ;
○ ○ ○
WARNING - Do not use the
original disks supplied with
the instrument for saving
data.
; ......
○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Disk 63