Recall A Style By Selecting The Performances - GEM PK5 Owner's Manual

While the track is flashing, you can change sound by specifying the corresponding number on the Sound
selection keypad.
If you also want to modify the track volume level, rotate the DIAL (TEMPO/DATA buttons for PK5).
4. Press START/STOP to start the Style.
Obviously these operations can also be performed during Style play; in this case, the selected Style will
start at the next measure.

Recall a Style by selecting the Performances

Each Performance contains a Style that you can recall. Pressing STORE PERFORMANCE and confirming
with ENTER memorizes the current panel configuration, including the current Style Variation, to the Perform-
ance.
It is possible, therefore, to recall a Style and relative Variation by selecting a Performance, provided that the
STYLE LOCK button is not active (off).
1. If STYLE LOCK is on, turn it off (corresponding display indicator off).
2. If the Performance function is not active, move the arrowhead with the cursor buttons until it appears near the PERF
menu function.
The 8 digit display area shows the name of the first Performance belonging to the first Group and the 3 digit
display area shows the current Performance Group number (e.g. G01:Welcome).
3. Select one of the 9 Performances belonging to the selected Group using the function buttons F1 ... F9.
PK7 PK5
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Note: You can also use a
quicker method to activate
the Perf function: press and
hold the STORE PER-
FORMANCE button for
about 2 seconds.
NB. The letter "G" in the 3
digit display area stands for
Group.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
The Styles 43