If the electronic key does not operate properly
If communication between the electronic key and vehicle is interrupted
(P. 133) or the electronic key cannot be used because the battery is
depleted, the smart access system with push-button start and wireless
remote control cannot be used. In such cases, the doors can be opened and
the engine can be started by following the procedure below.
Locking and unlocking the doors
Unlocking the door
■
Use the mechanical key (P. 109) to perform the following operations.
Insert the mechanical key while
1
pulling on the driver' s door han-
dle.
Unlocking the door.
2
Remove the key, return the handle, and then pull the handle again.
3
NX200t_U_OM78006U
8-2. Steps to take in an emergency
577
8