High Beam Automatic Turning On Or Off Conditions; Turning The High Beam On/Off Manually; Switching To Low Beam; Switching To High Beam - Lexus NX200t Owner's Manual

High beam automatic turning on or off conditions

When all of the following conditions are fulfilled, high beam will be automatically
turned on:
Vehicle speed is above approximately 34 km/h (21 mph).
●
The area ahead of the vehicle is dark.
●
There are no oncoming or preceding vehicles with headlights or tail lights
●
turned on.
There are few streetlights on the road ahead.
●
If any of the following conditions are fulfilled, high beam will be automatically
turned off:
Vehicle speed drops below approximately 27 km/h (17 mph).
●
The area ahead of the vehicle is not dark.
●
Oncoming or preceding vehicles have headlights or tail lights turned on.
●
There are many streetlights on the road ahead.
●

Turning the high beam on/off manually

Switching to low beam

■
Pull the lever to original position.
The Automatic High Beam indicator
will turn off.
Push the lever away from you to acti-
vate the Automatic High Beam sys-
tem again.

Switching to high beam

■
Press the Automatic High Beam
switch.
The Automatic High Beam indicator
will turn off and the high beam indi-
cator will turn on.
Press the switch to activate the Auto-
matic High Beam system again.
NX200t_U_OM78006U
4-3. Operating the lights and wipers
215
4