528
7-3. Do-it-yourself maintenance
Install the bulb base.
7
Align the 3 tabs on the light bulb with
the mounting, and insert. Turn it
clockwise to set.
Confirm the installation of the
8
bulb base.
Shake the bulb base gently to check
that it is not loose, turn the headlight
high beams on once and visually
confirm that no light is leaking
through the mounting.
Install the cover and turn it clock-
9
wise.
Align the
positioning mark of the lamp body
and insert and turn it.
There is the positioning mark on
the outer side of the light unit.
NX200t_U_OM78006U
of the cover to the