Preventing Data On The Hard Disk Of The Camcorder From Being Recovered - Sony DCR-SR220 Operating Manual

Preventing data on the hard disk of the camcorder
from being recovered
6
When [Completed.] appears, touch
lOKI.
4
Press and hold the
~
(back light)
button for a few seconds.
The [8EMPTY] screen appears.
[8EMPTY] allows you to write
unintelligible data onto the hard disk of
the camcorder. In this way, it may become
more difficult to recover any original
data. When you dispose of or transfer the
camcorder to others, it is recommended
that you perform [8 EMPTY].
" Notes
• If you perform [e EMPTY], all the images are
deleted. To avoid the loss of important images,
they should be saved (p. 37) before performing
[eEMPTY].
• You cannot perform [eEMPTY] unless you
connect the AC Adaptor to the wall outlet (wall
socket).
• Disconnect all cables except the AC Adaptor.
Do not disconnect the AC Adaptor during the
operation.
• While performing [eEMPTYj, do not apply
any vibrations or shocks.
II:.
~"SEMP'TY"l
D M a . . . . - " , _
It"SI!MI'lY"1 0 _
EST.PIlOCISST1M~
\lIS •.
1 I
NO
5
Touch [YES]
---+
[YES].
9
1
Connect the AC Adaptor to the DC
IN jack on your camcorder and a
wall outlet (wall socket).
2
Turn on your camcorder.
.
~.
Tips
• You can perform this operation, whichever
position of the
1:::1
(Movie) lamp/O (Still)
lamp is lit.
3
Touch
A
(HOME)
---+
~
(MANAGE
MEDIA)
---+
[MEDIA FORMAT]
---+
[HOD].
The [8FORMAT] screen appears.
" Notes
• The actual performing time for [eEMPTY] is
approx. 60 minutes.
• If you stop performing [e EMPTY] while
[Executing... ] appears, be sure to complete the
operation by performing [MEDIA FORMAT]
or [e EMPTY] when you use the camcorder
next time.
S4
II:.
I·
'IU
_ I
Ali_will ...
-
EST.PIlOCISS
nllE:,ls
I I.
NO
9