Step 2: Charging The Battery Pack - Sony DCR-SR220 Operating Manual

Step 2: Charging the battery pack
•
(IS-----1~ i/CHG (charge)
lamp
~
.
DC IN jack - - -
r
~
POWER switch
DC plug
To the wall outlet
~,
(wall socket)
AC Adaptor
I
~
. .
Power cord (Mains lead)
Battery pack
You can charge the "InfoLiTHIUM"
battery pack (H series) (p. 94) after
attaching it to your camcorder.
" Notes
• Your camcorder operates only with an
"InfoLITHIUM" battery pack (H series).
1
Connect the AC Adaptor to the DC
IN jack on the Handycam Station.
Be sure that the .. mark on the DC plug
is facing up.
2
Connect the power cord (mains
lead) to the AC Adaptor and the wall
outlet (wall socket).
3
Turn the POWER switch in the
direction of the arrow to OFF (CHG)
(the default setting).
4
Attach the battery pack by sliding it
in the direction of the arrow until it
clicks.
5
Set the camcorder onto the
Handycam Station securely.
The i/CHG (charge) lamp lights up and
charging starts.
The i/CHG (charge) lamp turns off
when the battery pack is fully charged.
• When setting the camcorder onto the
Handycam Station, close the DC IN jack
cover.
" Notes
• Disconnect the AC Adaptor from the DC IN
jack holding both the Handycam Station and
the DC plug.
13