Table of Contents
Advertisement
DISK CARE
DISK INSERTION
Make sure that the safety
tab is not removed.
Insert the disk with the
arrow facing the outside.
DISK EJECTION
-| Slide the EJECT button in the direction of the arrow.
2 Take out the disk.
_
3 Push to close the disk holder.
When a disk with the safety tab removed Is inserted
If the POWER switch is ON, the remaining shot
counter indicates
and the unit cannot operate.
If the POWER switch is OFF, the unit cannot
Note |
The EJECT button does not function during
recording or immediately after the power is turned
On.
Note on replacement of the disk
Do not replace the disk where rain, dust or other
foreign objects might enter the disk drive unit inside
the camera recorder. Such contamination may
damage the unit.
Advertisement
Table of Contents
