Sony DCR-SR220 Operating Manual page 51

18
To turn off the power
Turn the POWER switch to OFF (CHG).
" Notes
• If you do not use your camcorder for
about
3 months, the built-in rechargeable battery
gets discharged and the date and time settings
may be cleared from the memory. In that case,
charge the built-in rechargeable battery and
then set the date and time again (p. 97).
• It takes a few seconds for your camcorder to
be ready to shoot after the power is turned on.
You cannot operate your camcorder during this
time.
• The lens cover opens automatically when the
power is turned on. It closes when the playback
screen is selected, or the power is turned off.
• In the default setting, the power turns off
automatically if you leave your camcorder
unoperated for approximately 5 minutes, to
save battery power ([A.SHUT OFF], p. 69).
.
~.
Tips
• The date and time do not appear during
recording, but they are automatically recorded
on the media, and can be displayed during
playback ([DATA CODE], p. 64).
• Refer to page 91 for information concerning
"World time difference."
• If the buttons on the touch panel do not
work correctly, adjust the touch panel
[CALIBRATION] (p. 96).
Changing
th~.linguagesettiri;
You can change the on-screen displays to
show messages in a specified language.
Touch
A
(HOME)
--+
iii; (SETTINGS)
--+
[CLOCK/~LANG] --+ [~LANGUAGE
SET], then select the desired language.