1. Manuals
  2. Brands
  3. Planet Manuals
  4. Wireless Router
  5. WNRT-320GS
  6. User manual

Planet WNRT-320GS User Manual

3g/802.11n wireless portable router with 3g hsupa
Hide thumbs Also See for WNRT-320GS:
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading

Related Manuals for Planet WNRT-320GS

Summary of Contents for Planet WNRT-320GS

  • Page 2: Federal Communication Commission Interference Statement

    Copyright Copyright ©2012 by PLANET Technology Corp. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of PLANET.

  • Page 3: Ce Mark Warning

    Federal Communication Commission (FCC) Radiation Exposure Statement This equipment complies with FCC radiation exposure set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20 cm (8 inches) during normal operation. CE mark Warning This is a class B device, in a domestic environment;...
  • Page 4 Do not dispose of WEEE as unsorted municipal waste and have to collect such WEEE separately. Revision User’s Manual for PLANET 3G / 802.11n Wireless Portable Router with 3G HSUPA Model: WNRT-320GS Rev: 1.0 (March, 2012) Part No. EM-WNRT320GSv1_v1.0 (2081-E50250-000)

  • Page 5: Table Of Contents

    CONTENTS Chapter 1. Product Introduction......................1 1.1. Package Contents ......................1 1.2. Product Description ....................... 1 1.3. Product Features......................4 1.4. Product Specification..................... 5 Chapter 2. Hardware Interface ......................8 2.1. Overview........................8 2.2. LED Indications ......................9 Chapter 3. Installation Guide ......................10 3.1.
  • Page 6 4.6. Firewall ........................45 4.6.1. Port Filtering ......................45 4.6.2. IP Filtering ......................46 4.6.3. MAC Filtering.....................47 4.6.4. Port Forwarding ....................48 4.6.5. URL Filtering......................49 4.6.6. DMZ........................50 4.7. QoS ..........................51 4.8. Route Setup ........................53 4.9. Management .......................53 4.9.1. Status.........................54 4.9.2. Statistics ......................54 4.9.3. DDNS ........................55 4.9.4.

  • Page 7: Chapter 1. Product Introduction

    3G / WAN Internet access and high speed IEEE 802.11n wireless transmission. The WNRT-320GS is equipped with a built-in 3G module for the connection to WCDMA / HSDPA / HSUPA mobile network. Users can install their SIM card into the slot of the WNRT-320GS directly without any external 3G modem necessary any more.
  • Page 8 More Flexibility and Mobility With the tiny-sized and stylish design, the WNRT-320GS is easy to carry for true mobility. It can be operate in various environments by hardware switch with the AP and Router modes, which helps to immediately set up a wireless network without software configuration.
  • Page 9 One-touch Secure Wireless Connection In order to simplify security settings for home and SOHO network, the WNRT-320GS supports Wi-Fi Protected Setup (WPS) with configuration in PBC and PIN type. Just push the WPS button or key in...

  • Page 10: Product Features

    Advanced Firewall Security In the Router mode, the WNRT-320GS supports NAT functions and allows multiple users to access Internet via only one single legal IP. It provides Port Forwarding and DMZ for LAN PC to act as an application server.

  • Page 11: Product Specification

    User’s Manual of WNRT-320GS Dual Network Interfaces: WAN port for cable or wired xDSL service + built-in 3G mobile connection Compatible with WCDMA / HSDPA / HSUPA Mobile Network Industrial Compliant Wireless LAN & LAN Compliant with IEEE 802.11n wireless technology capable of up to 150Mbps data rate Backward compatible with 802.11b/g standard...
  • Page 12 User’s Manual of WNRT-320GS 1 x mini USB port for charging battery Gain 1 x Internal 2dBi Antenna Antenna Orientation Omni-directional Rear panel (from left to right): Power On/Off Switch Mode Selection Switch (Router/AP) Button/Switch Side panel: WPS button Reset button...
  • Page 13 User’s Manual of WNRT-320GS Provide wireless LAN ACL (Access Control List) filtering Wireless MAC address filtering Wireless Security Support WPS (W Protected Setup) i-Fi Enable/Disable SSID Broadcast WMM(Wi-Fi Multimedia): 802.11e Wireless QoS Inter Access Point Protocol) Wireless Advanced IAPP( : 802.11f Wireless Roaming...

  • Page 14: Chapter 2. Hardware Interface

    Mode Selection Switch, used to select Router or AP mode AP/RT Press the button for about 5 seconds to activate the WPS function. WPS Button Reset the WNRT-320GS to the factory default settings by pressing Reset down the Reset button for about 5 seconds.

  • Page 15: Led Indications

    The LEDs on the top panel indicate the instant status of system power, wireless data activity, WPS, port links, battery, and help monitor and troubleshoot when needed. Figure 2-3 Table 2-1 show the LED indications of the WNRT-320GS. Figure 2-3 Top Panel LED Definition COLOR STATE...

  • Page 16: Chapter 3. Installation Guide

    IP address automatically by the DHCP server of WNRT-320GS and share the same public IP assigned by 3G mobile base station or local ISP through WAN port of the WNRT-320GS. The WAN port of WNRT-320GS is supposed to connect with the Cable / xDSL Modem by the Ethernet cable.

  • Page 17: Ap Mode

    IP address from some other network device with DHCP server enabled in the same subnet of WNRT-320GS.Or users can assign a fixed IP address for client device as well in the Control Panel of Windows. The LAN port of WNRT-320GS is supposed to connect with the Ethernet directly by the Ethernet cable.
  • Page 18 User’s Manual of WNRT-320GS 1) On the Windows taskbar, click the Start button, point to Control Panel, and then click it. 2) Under the Network and Internet icon, click on the View network status and tasks. And then click Change adapter settings.
  • Page 19 User’s Manual of WNRT-320GS 4) In the prompt window shown below, double click on the Internet Protocol Version 4 (TCP/IPv4). Figure 3-5 5) Choose Obtain an IP address automatically, and Obtain DNS server address automatically as shown in the figure below. Then click OK to save your settings.

  • Page 20: Configure The Ip Address Manually

    IP address manually for your computer. The IP address of your PC should be 192.168.1.xxx (the same subnet of the IP address of WNRT-320GS, and "xxx" is any number from 2 to 254), Subnet Mask is 255.255.255.0, and the Gateway is 192.168.1.1 (The default IP address of WNRT-320GS) 1) Continue the settings from the last figure, select Use the following IP address radio button.

  • Page 21: Hardware Installation

    User’s Manual of WNRT-320GS Figure 3-7 3.4. Hardware Installation Please follow the instructions below to build the wireless network connection between WNRT-320GS and your computers. Do not dispose of the battery in a fire or any other high-temperature place as it may explode.
  • Page 22 User’s Manual of WNRT-320GS Figure 3-8 Before installing the WNRT-320GS, make sure your PC is able to surf the Internet through the broadband service successfully at this moment. If there is any problem, please contact your local ISP. After that, please install the WNRT-320GS according to the following steps.
  • Page 23 The procedures of hardware installation are finished. Please continuously follow the next section to start the setup in the web UI. If you want to configure the WNRT-320GS via wireless connection, please use your PC to site survey the wireless signal of WNRT-320GS, and connect your PC with it wirelessly. Default SSID: default...

  • Page 24: Starting Setup In Web Ui

    Figure 3-11 3.5. Starting Setup in Web UI It is easy to configure and manage the WNRT-320GS via web browser. To access the web UI of the WNRT-320GS, please open a web browser and enter the default IP address http://192.168.1.1 in the address field of the browser.
  • Page 25 Using Proxy checkbox, and click OK to finish it. After you enter the username and password, the main screen appears as Figure 3-14 Figure 3-14 WNRT-320GS Web UI Screenshot The next chapter will introduce the functions of the web UI. -19-...

  • Page 26: Chapter 4. Configuration In Web Ui

    Chapter 4. Configuration in Web UI 4.1. Login After successfully logging into the web UI of the WNRT-320GS, you will see the main menus on the left side of the web-based utility. There are some different options appear as the operation mode changes.
  • Page 27 User’s Manual of WNRT-320GS Step 1. The figure below is the screen of the Setup Wizard in Router Mode. Please click the “Next>>” button to continue. Figure 4-2 Step 2. Please select the corresponding WAN connection type of your Internet service, and fill the correct parameters in the blanks.
  • Page 28 User’s Manual of WNRT-320GS AP Mode Step 1. The figure below is the screen of the Setup Wizard in AP Mode. Please click the “Next>>” button to continue. Figure 4-4 Step 2. Please enter the SSID for recognizing the wireless connection. The default value is “default”.

  • Page 29: Operation Mode

    User’s Manual of WNRT-320GS Step 3. Please select the wireless security mode, and setup the password for wireless connection. Then click the “Finished” button to save the settings and reboot to take effect. Figure 4-6 4.3. Operation Mode This page shows the current operation mode, but users can only change it by shifting the hardware switch on the WNRT-320GS.

  • Page 30: Wireless

    User’s Manual of WNRT-320GS 4.4. Wireless The Wireless menu contains submenus of the settings about wireless network. Please refer to the following sections for the details. Figure 4-8 4.4.1. Basic Settings Choose menu “Wireless Basic Settings”, and you can configure the basic settings for the wireless network in this page.
  • Page 31 User’s Manual of WNRT-320GS Figure 4-9 Wireless Basic Settings Object Description Disable Wireless LAN Check the box to disable the wireless function. Interface Select the desired mode. Default is “2.4GHz (B+G+N)”. It is strongly recommended that you set the Band to “2.4GHz (B+G+N)”, and all of 802.11b, 802.11g, and 802.11n wireless stations can connect to the...
  • Page 32 AP” button to enable multiple SSID function. Mode In Infrastructure, the wireless LAN serves as a wireless station. And the user can use the PC equipped the WNRT-320GS to access the wireless network via other access point. In Ad hoc, the wireless LAN Network Type will use the Ad-hoc mode to operate.

  • Page 33: Advanced Settings

    You can select the operating frequency of wireless network. If you enable “Broadcast SSID”, every wireless station located within the coverage of the WNRT-320GS can discover its signal easily. If you are building a public wireless network, enabling this feature is Broadcast SSID recommended.
  • Page 34 User’s Manual of WNRT-320GS Object Description You can specify the maximum size of packet during the fragmentation of data to be transmitted. If you set this value too low, it will result in Fragment Threshold bad performance. Default is “2346”.

  • Page 35: Security

    User’s Manual of WNRT-320GS 4.4.3. Security Choose menu “Wireless Security”, and you can configure the settings of wireless security for the wireless network in this page. After the configuration, please click the “Apply Changes” button to save the settings. Figure 4-11 Wireless Security...

  • Page 36: Access Control

    Choose menu “Wireless Access Control”, you can choose to allow or deny the computer of specified MAC address to connect with the WNRT-320GS in this page. After the configuration, please click the “Apply Changes” button to save the settings. Figure 4-12 Wireless Access Control...

  • Page 37: Wds Settings

    APs which you want to communicate with in the table and then enable the WDS. Choose menu “Wireless WDS Settings”, and you can configure WDS to connect the WNRT-320GS with another AP in this page. After the configuration, please click the “Apply Changes” button to save the settings. Figure 4-13 WDS Settings...

  • Page 38: Site Survey

    User’s Manual of WNRT-320GS parameters of the AP you want to connect via WDS. C lick the “Show Statics” button to show the WDS AP. Show Statics You can select some MAC address of the AP, and click the “Delete Current WDS AP List Selected”...

  • Page 39: Schedule

    Here you can check if the connection via WPS is established or not. WPS Status Self-PIN Number It is the PIN number of the WNRT-320GS here. Click the “Start PBC”, and then activate WPS as well in the client Push Button Configuration device within 2 minutes.

  • Page 40: Tcp/Ip Settings

    User’s Manual of WNRT-320GS Figure 4-16 Wireless Schedule 4.5. TCP/IP Settings The TCP/IP Settings menu contains submenus of the settings about LAN and WAN. Please refer to the following sections for the details. Figure 4-17 4.5.1. LAN Interface Choose menu “TCP/IP Settings LAN Interface”, and you can configure the parameters for LAN...
  • Page 41 Figure 4-18 LAN Interface Object Description The LAN IP address of the WNRT-320GS, and default is 192.168.1.1. IP Address You can change it according to your request. Subnet Mask Default is 255.255.255.0. You can change it according to your request.

  • Page 42: Wan Interface

    User’s Manual of WNRT-320GS 4.5.2. WAN Interface Choose menu “TCP/IP Settings WAN Interface”, and you can configure the parameters for the Internet network. After the configuration, please click the “Apply Changes” button to save the settings. Figure 4-19 WAN Interface – WAN Access Type and Features...
  • Page 43 Enable Ping Access on WAN Enable Web Server Access Check the box to enable the web server access of the on WAN WNRT-320GS from the Internet network. Check the box to enable IPsec pass through function on VPN Enable IPsec pass through connection.
  • Page 44 USB3G Please select USB3G when you want to surf the Internet via 3G mobile Internet service. The WNRT-320GS will automatically obtain a public IP address from your mobile ISP. Please refer to the instructions below to configure the correct parameters.
  • Page 45 User’s Manual of WNRT-320GS click Connect button to make a connection. It represents that the device will idle after the minutes you set. The time must be set between 1~1000 minutes. Default value of idle time is Idle Time 5 minutes. This function will be available when the Connection Type is selected to Connect on Demand.
  • Page 46 User’s Manual of WNRT-320GS PPPoE If your ISP provides a PPPoE connection, please select PPPoE option. The user has to setup the user name and password provided by your ISP. Please refer to the instructions below Figure 4-22 WAN Access Type – PPPoE...
  • Page 47 User’s Manual of WNRT-320GS Static IP If your ISP provides a static IP address, please select Static IP and setup the related parameters manually. Please refer to the instructions below Figure 4-23 WAN Access Type – Static IP Object Description Enter the IP address in dotted-decimal notation provided by your ISP.
  • Page 48 User’s Manual of WNRT-320GS PPTP If your ISP provid es PPTP connection, please select PPTP option and enter the correct parameters. Please refer to the instructions below Figure 4-24 WAN Access Type – PPTP Object Description Enter the PPTP Server IP address in dotted-decimal notation provided Server IP Address by your ISP.
  • Page 49 User’s Manual of WNRT-320GS DNS1 Enter the DNS server IP address provided by your ISP, or you can specify your preferred DNS server IP address. DNS2 You can enter the IP address of another DNS server as a backup. DNS 2 server will be used when the DNS 1 server fails.
  • Page 50 User’s Manual of WNRT-320GS Object Description Enter the L2TP Server IP address in dotted-decimal notation provided by Server IP Address your ISP. User Name Enter the User Name provided by your ISP. This field is case-sensitive. Password Enter the Password provided by your ISP. This field is case-sensitive.

  • Page 51: Firewall

    User’s Manual of WNRT-320GS DHCP Client If your ISP provides the DHCP service, please select DHCP Client type, and the WNRT-320GS will automatically obtain IP parameters from your ISP. Please refer to the instructions below Figure 4-26 WAN Access Type – DHCP Client...

  • Page 52: Ip Filtering

    User’s Manual of WNRT-320GS Figure 4-28 Port Filtering Object Description Enable Port Filtering Enable port filtering Port Range Add ports you want to control Select the port number protocol type (TCP, UDP or both). If you are Protocol unsure, then leave it to the default both protocol...

  • Page 53: Mac Filtering

    User’s Manual of WNRT-320GS Figure 4-29 IP Filtering Object Description Enable IP filtering Enable IP Filtering Add LAN IP address you want to control Local IP Address Select the port number protocol type (TCP, UDP or both). If you are...

  • Page 54: Port Forwarding

    User’s Manual of WNRT-320GS Figure 4-30 MAC Filtering Object Description Enable MAC filtering Enable MAC Filtering Add MAC address you want to control MAC Address The description of this setting Comment Table 4-17 Check the “Select” box of which rule you want to delete, and then click the “Delete Selected” button to delete it.

  • Page 55: Url Filtering

    User’s Manual of WNRT-320GS Figure 4-31 Port Forwarding Object Description Enable Port Forwarding function Enable Port Forwarding Add LAN IP address of specified host or server on the private local IP Address network Select the port number protocol type (TCP, UDP or both). If you are...

  • Page 56: Dmz

    User’s Manual of WNRT-320GS Figure 4-32 URL Filtering Check the “Select” box of which rule you want to delete, and then click the “Delete Selected” button to delete it. 4.6.6. DMZ This page allows you to set a De-militarized Zone (DMZ) to separate internal network and Internet.

  • Page 57: Qos

    User’s Manual of WNRT-320GS Object Description Check the box to enable DMZ function. If the DMZ Host Function is enabled, it means that you set up DMZ host at a particular computer to Enable DMZ be exposed to the Internet so that some applications/software, especially Internet / online game can have two way connections.
  • Page 58 Enable QoS Check the box to adjust the uplink speed automatically by the Automatic Uplink Speed WNRT-320GS. Or enter the uplink data rate manually in the field below. Check the box to adjust the downlink speed automatically by the Automatic Downlink WNRT-320GS.

  • Page 59: Route Setup

    The page is used to setup dynamic routing protocol or edit static route entry. After the configuration, please click the “Apply Changes” button to save the settings. Figure 4-35 Routing Setup 4.9. Management The Management menu contains submenus of the general settings of the WNRT-320GS. Please refer to the following sections for the details. -53-...

  • Page 60: Status

    User’s Manual of WNRT-320GS Figure 4-36 4.9.1. Status Choose menu “Management Status” to show the current status and some basic settings of the WNRT-320GS. Figure 4-37 Status 4.9.2. Statistics Choose menu “Management Statistics” to show the packet counters for transmission and reception regarding to wireless and Ethernet network.

  • Page 61: Ddns

    User’s Manual of WNRT-320GS Figure 4-38 Statistics Item Description It shows the statistic count of sent packets on the wireless LAN interface. Wireless LAN Sent Packets It shows the statistic count of received packets on the wireless LAN interface. Wireless LAN Received Packets It shows the statistic count of sent packets on the Ethernet WAN interface.

  • Page 62: Time Zone Setting

    User’s Manual of WNRT-320GS Figure 4-39 DDNS Object Description Enable DDNS Check the box to enable the Dynamic DNS function. Service Provider Select the DDNS service provider. Enter the domain name you have registered from the DDNS service Domain Name provider.

  • Page 63: Denial Of Service

    User’s Manual of WNRT-320GS Figure 4-40 Time Zone Setting Object Description Input current time manually. Time Zone Select Select the time zone of the country you are currently in. The router will Time Zone Select set its time based on your selection.

  • Page 64: Log

    User’s Manual of WNRT-320GS Figure 4-41 Denial of Service Object Description Enable DoS Check to enable DoS function. User may set other related configurations Prevention about DoS below Table 4-24 4.9.6. Log Choose menu “Management Log” to configure the settings of system log. You can check the box of the items you want to record it in the log.

  • Page 65: Upgrade Firmware

    Select which log you want to check. Related information will be shown at System all/Dos below. Table 4-25 4.9.7. Upgrade Firmware Choose menu “Management Upgrade Firmware” to upgrade the firmware of the WNRT-320GS. Select the new firmware file downloaded from the PLANET website, and then click “Upload” button to upgrade it. -59-...

  • Page 66: Save/Reload Settings

    Click the “Save…” button to backup the configuration of the Save Settings to File WNRT-320GS. And then save the “config.dat” in your computer. Select the configuration file of the WNRT-320GS, and then click the Load Settings from File “Upload” button...

  • Page 67: Password

    Input the password for this user. Confirm the password again. Confirmed Password Table 4-28 4.10. Logout Click “Logout” to log out the web UI of the WNRT-320GS. And then click the “Apply Change” button for sure. Figure 4-46 Logout -61-...

  • Page 68: Chapter 5. Quick Connection To A Wireless Network

    User’s Manual of WNRT-320GS Chapter 5. Quick Connection to a Wireless Network 5.1. Windows XP (Wireless Zero Configuration) Step 1: Right-Click on the wireless network icon displayed in the system tray Figure 5-1 Step 2: Select [View Available Wireless Networks]...
  • Page 69 User’s Manual of WNRT-320GS Step 4: Enter the encryption key of the Wireless Router (1) The Wireless Network Connection box will appear (2) Enter the encryption key that configured in section 4.4.3 (3) Click the [Connect] button Figure 5-3 Step 5: Check if “Connected” is displayed...

  • Page 70: Windows 7 (Wlan Autoconfig)

    User’s Manual of WNRT-320GS Some laptops are equipped with an “Wi-Fi ON/OFF” hardware switch for the internal wireless LAN. Make sure the it is switched to “ON” position. 5.2. Windows 7 (WLAN AutoConfig) WLAN AutoConfig service is built-in in Windows 7 and can be used to detect and connect to wireless network.
  • Page 71 User’s Manual of WNRT-320GS Figure 5-7 If you want to connect to this Wireless Router in the future, please check the box of [Connect automatically]. Step 3: Enter the encryption key of the Wireless Router (1) The [Connect to a Network] box will appear (2) Enter the encryption key that configured in section 4.4.3...

  • Page 72: Mac Os X

    User’s Manual of WNRT-320GS Figure 5-8 Figure 5-9 Step 4: Check if “Connected” is displayed Figure 5-10 5.3. Mac OS X Step 1: Right-Click on the network icon displayed in the system tray The AirPort Network Connection menu will appear...
  • Page 73 User’s Manual of WNRT-320GS Figure 5-11 Step 2: Highlight and select the wireless network (SSID) to connect (1) Select and SSID [default] (2) Double-click on the selected SSID Figure 5-12 Step 3: Enter the encryption key of the Wireless Router (4) Enter the encryption key that configured in section 4.4.3...
  • Page 74 User’s Manual of WNRT-320GS Figure 5-13 If you want to connect to this Wireless Router in the future, please check [Remember this network]. Step 4: Check if the AirPort is connect to the selected wireless network. If “Yes”, then there will be a “check” symbol in front of the SSID.
  • Page 75 User’s Manual of WNRT-320GS There is another way to configure the MAC OS X Wireless settings: Step 1: Click and open the [System Preferences] by going to Apple > System Preference or Applications Figure 5-15 Step 2: Open Network Preference by clicking on the [Network] icon...

  • Page 76: Iphone / Ipod Touch / Ipad

    User’s Manual of WNRT-320GS Step 3: Check Wi-Fi setting and select the available wireless network (1) Choose the AirPort on the left-menu (make sure it is ON) (2) Select Network Name [default] here If this is the first time to connect to the Wireless Router, it should shows “Not network selected”.
  • Page 77 User’s Manual of WNRT-320GS Figure 5-18 Step 2: Check Wi-Fi setting and select the available wireless network (3) Tap [General] \ [Network] (4) Tap [Wi-Fi] If this is the first time to connect to the Wireless Router, it should appears “Not Connected”.
  • Page 78 User’s Manual of WNRT-320GS Figure 5-20 Step 3: Tap the target wireless network (SSID) in “Choose a Network…” (1) Turn on Wi-Fi by tapping “Wi-Fi” (2) Select SSID [default] Figure 5-21 Step 4: Enter the encryption key of the Wireless Router (1) The password input screen will be displayed (2) Enter the encryption key that configured in section 4.4.3...
  • Page 79 User’s Manual of WNRT-320GS Figure 5-22 Step 5: Check if the iDevice is connected to the selected wireless network. If “Yes”, then there will be a “check” symbol in front of the SSID. Figure 5-23 -73-...

  • Page 80: Appendix

    WNRT-320GS. All cords and cables should be to access it via web browser correctly and firmly inserted to the device. If all LEDs on the WNRT-320GS are off, please check the status of power adapter, and make sure it is correctly powered.
  • Page 81 DNS setting. a. Check if the “Broadcast SSID” is disabled. Unable to be found by the b. Are you too far from the WNRT-320GS? Try to get wireless clients closer. c. Please remember that you have to enter SSID to your wireless client device manually, if SSID broadcast is disabled.

  • Page 82: Ec Declaration Of Conformity

    *Model Number: WNRT-320GS * Produced by: Manufacturer‘s Name : Planet Technology Corp. Manufacturer‘s Address: 10F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.) is herewith confirmed to comply with the requirements set out in the Council Directive on the 1999/5/EC R&TTE.
  • Page 83 Directiva ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ 1999/5/CE. ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ Español Por medio de la presente, PLANET Technology Slovensky Výrobca PLANET Technology Corporation, týmto Corporation, declara que 3G / 802.11n Wireless deklaruje, že táto 3G / 802.11n Wireless Portable Portable Router with 3G HSUPA cumple con los Router with 3G HSUPA je v súlade so základnými...

Table of Contents