Specifications - RIDGID Compact 100-B Operator's Manual

Compact 100-B Pressing Tool
ward and applying thousands of pounds of pressing force
onto specially designed fittings.
The entire cycle duration is approximately seven (7) sec-
onds. Once the cycle begins to deform a fitting, it will auto-
matically continue until completion, even if the trigger
switch is released. LED displays on the top of the tool indi-
cate problems such as improper temperature, open jaw
mounting pin or maintenance required.
ProPress ®
Jaw
Jaw Arm
Sideplate
Jaw
ProPress ®
Mounting
Scissor Style
Pin
Jaw Set
Switch
Figure 1 – Compact 100-B Pressing Tool and ProPress
System Jaw Set

Specifications

Compact 100-B Pressing Tool:
Motor
Voltage ...................14.4 VDC
Amperage ...............25.6Amp
Power .....................325 Watts
Weight ........................7.5 lbs. (3.4 Kg) with Battery
5.7 lbs. (2.6 Kg) without Battery
Ram Force.....................5,400 Lbs. (24kN)
Operating Temperature
Range...............................32° F to 122° F (0° C to 50° C)
NOTE! The Compact 100-B Pressing Tool and Compact
Jaw Sets are protected under various U.S. and
international patents and patent applications.
ProPress ® System For Copper Tubing
Jaw Sets:
RIDGID ProPress Compact Jaw Sets are designed to
®
mechanically press fittings onto
copper tubing. An individual jaw set is required for each
size tubing.
4
LED Display
Panel (Top)
Tool Housing
Handle
Battery
®
1 / " 3 / " and 1" soft or hard
2 4
Ridge Tool Company
Catalog No. Size
16958 1 / "
2
16963 3 / "
4
16978 1"
Only use RIDGID pressing tools and Pro-
CAUTION
Press ® jaw sets that are specifically designed for use with
ProPress copper and bronze fittings. Use of unautho-
®
rized pressing tools and/or jaw sets to press ProPress
tings voids the user's warranty.
NOTE! Contact a RIDGID distributor or consult the
ProPress ® product catalog for a list of available
fittings.
When using ProPress ® tools and fittings to join
soft copper tubing, users should ensure that tubing is
sufficiently round to slide into the fitting without excessive
effort or mechanical force. If a user finds that a section of
1 / " to 1" soft copper tubing requires more hand-force to
2
slide into a ProPress ® fitting than would a section of hard
copper tubing of the same size, the user should re-round
the soft tubing or find an acceptable section.
PureFlow™ Systems for PEX Tubing Jaw Sets:
RIDGID PureFlow™ Compact Jaw Sets are designed to
mechanically press PureFlow™ fittings onto
and 1" Viega Pextron™, Fostapex™ or Pexcel™ PEX tub-
ing. An individual jaw set is required for each size tubing.
Catalog No. Size
17003 3 /
"
8
17008 1 / "
2
17013 3 / "
4
17018 1"
CAUTION Only use RIDGID pressing tools and RIDGID
PureFlow™ jaw sets that are specifically designed for
use with PureFlow™ fittings. Use of unauthorized pressing
tools and/or jaw sets to press PureFlow™ fittings voids the
user's warranty.
NOTE! ProPress ® , PureFlow™, Pexcel™, Pextron™
and FostaPex™ are registered trademarks of
Viega GmbH & Co. KG.
NOTE! RIDGID jaw sets are offered in two "series"
• Standard Series
• Compact Series
These jaw sets are not interchangeable. That
is, only compact series jaw sets will work with the
Compact 100-B Pressing Tool. Similarly, only
standard series jaw sets will work with standard
series tools. Please refer to the standard series
tools' (320-E, CT-400) operator's manuals for
further information on these tools and jaws.
Weight
2.15 lbs. (0,98kg)
2.22 lbs. (1,01 kg)
2.28 lbs. (1,03 kg)
® fit-
1 / " to 1"
2
3 / 1 / 3 /
", ", "
8 2 4
Weight
2.39 lbs. (1,08kg)
2.38 lbs. (1,08 kg)
2.34 lbs. (1,06 kg)
2.60 lbs (1,18 kg)