Dmx Channel List; Master Slave Mode - Varytec LED Laser 4 User Manual

2.3.1. DMX channel list

Channel Value
0-119
CH 1
120-255
CH 2 1-255
CH 3 1-255
CH 4 1-255
0
CH 5
1-255
CH 6 1-255
Suggestion : The LED should not be lighted over 10 second, during the dimmer mode,
2.4.

Master Slave Mode

1. The master runs as the dipswitches " #1,#2,#3~8,#10 " are on the " OFF " position . And the
positions of dipswitches show as picture:
2. The slave runs as any dipswitch in "#1~#8" is on the "ON" position. And the positions of
dipswitches show as picture
3. It runs under Sound Active Mode when dipswitch #9 is on the " ON " position. And the
positions of dipswitches show as picture:
Function
ON
OFF
Adjust the bright of Red LED(The LED get
more brightness as the value increasing.)
Adjust the bright of Green LED(The LED get
more brightness as the value increasing.)
Adjust the bright of Blue LED(The LED get
more brightness as the value increasing.)
Adjust the brightness.
Choosing the fancy.
Adjust the speed of fresh(The speed getting
more faster as the value increasing.)
5 / 7
Remark
When the value of
channel 5 is "0"
37 fancy