Connecting Entertainment Devices; Where Are The Connection Diagrams; What Cables Do I Need - Scientific Atlanta Explorer 8300 User Manual

Connecting Entertainment Devices

Where Are the Connection Diagrams?

The diagrams on the following pages show examples of common ways to connect the 8300 to your TV,
VCR, and home theater receiver.
However, these diagrams do not show every possible combination of devices. Please consult the user's
guides that came with your other electronic devices for further information.

What Cables Do I Need?

Some of the cables shown in the diagrams may not be included with the 8300. The required cables are
shown in the connection diagrams on the following pages.
How Do I Connect the 8300 to My TV and Other Entertainment Devices?
When you are ready to connect the 8300, follow these instructions.
1. Power off all electrical devices before connecting to avoid electrical shock.
2. Connect the 8300 to your TV, VCR, and other entertainment devices as shown in the diagrams on
the following pages. (The diagrams in this guide do not cover every possible combination.)
3. Connect the 8300 to the coaxial cable coming from the wall.
4. Plug the 8300 and the TV into an AC power source.
5. Do not turn on the set-top or TV yet.
6. Wait until you see one of the following displays on the front of the set-top:
• Current time
• Four dashes (- - - -)
Important: It may take several minutes for the set-top to receive the latest software, programming, and
service information. When the front panel displays the time or four dashes, the update is complete.
7. After the update is complete, turn on the TV.
How Do I Set Up Stereo Sound?
To set up stereo sound, choose one of the following options:
• Connect an RCA cable from the DIGITAL AUDIO OUT on the 8300 to the DIGITAL AUDIO IN on your TV
(if equipped) or stereo receiver.
• Connect stereo audio cables from the AUDIO OUT LEFT and RIGHT connectors on the 8300 to the
AUDIO IN LEFT and RIGHT connectors on your TV.
4