What's On The Back Panel - Scientific Atlanta Explorer 8300 User Manual

What's On the Back Panel?

T11274
1 Cable In
2 Cable Out
3 Audio Out
(LEFT and
RIGHT)
4 Video Out
5 Digital Audio
Output
6 Secondary Video
and Audio Out
7 S-Video Out
8 IR
9 SATA
10 AC Outlet
11 AC Power Input
THIS DEVICE IS INTENDED TO BE ATTACHED
TO A RECEIVER THAT IS NOT USED TO
RECEIVE OVER-THE-AIR BROADCAST
SIGNALS. CONNECTION OF THIS DEVICE
CABLE
IN ANY OTHER FASHION MAY CAUSE
IN
HARMFUL INTERFERENCE TO RADIO
COMMUNICATIONS AND IS IN VIOLATION
OF THE FCC RULES, PART 15.
CATV CONVERTER
MADE IN MEXICO
1
Connect the coaxial cable that delivers the signal from your cable service
provider
Connect a coaxial cable to Cable Out to send analog audio and video signals
to a TV or VCR. These signals are SDTV video and stereo audio
Connect RCA cables to Audio Out to send analog audio signals (left and right)
to a stereo receiver or TV with stereo outputs
Connect to video input of TV or VCR
Connect an RCA cable to send a digital audio signal to a surround-sound
receiver or other digital audio device
Connect either to a VCR for archiving saved content from the 8300 or connect
to another set of inputs (composite) on your TV
Connect an S-Video cable to send an S-Video signal to your TV or VCR. This
signal is standard definition but higher quality than other SDTV connections
(This connector reserved for future use)
Connect to an external Serial ATA (SATA) hard disk drive for expanded
recording capability. Please check with your cable service provider for a list of
approved hard drive models for use with the 8300
Connect the AC power cord from another device, such as a TV
Connect the power cord to deliver power to the 8300
CABLE
OUT
OUT 1 OUT 2
A
U
IR
L
D
I
O
TV
R
S - VIDEO
VIDEO DIGITAL VIDEO
OUT
AUDIO OUT
2 3 4 5 6 7 8
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS:
RISQUE DE CHOC
ELECTRIQUE NE PAS OUVRIR
120 VAC 120 VAC
60HZ 5A 60HZ 80W
SATA
LISTED 14H1
CABLE EQUIP.
9 10 11
3