Removing The Top Cover For Type 6270 And 6276 - IBM 6266 User Manual

Removing the top cover for type 6270 and 6276

Follow these steps to remove the system unit top cover:
Note:
1. Remove the three screws that secure the top cover at the back of the system
unit.
2. Hold both sides of the system unit cover and push it backward about 25 mm
(1 in.). Lift the top cover up to remove it completely.
See "Taking safety precautions" on page 5-5 to
disconnect the cables before you perform the
following steps.
Preparing to upgrade 5-7