Installing The Drive Cage; Removing The Fan Shelter - Dell OptiPlex 3010 Owner's Manual

7. Remove the data cable and power cable from the back of the hard drive.
8. Remove the drive cage from the computer.
Related Links

Installing the Drive Cage

Installing The Drive Cage
1. Place the drive cage on the edge of the computer to allow access to the cable connectors on the hard drive.
2. Connect the data cable and power cable to the back of the hard drive.
3. Flip over the drive cage and insert it into the chassis. The drive cage tabs are secured by the slots in the chassis.
4. Slide the drive-cage handle toward the front of the computer into the locked position.
5. Connect the data cable and power cable to the back of the optical drive.
6. Install the front bezel.
7. Install the cover.
8. Follow the procedures in
Related Links
Removing The Drive Cage

Removing the Fan Shelter

1. Follow the procedures in
2. Remove the cover.
3. Unthread the cables in the fan shelter clip.
After Working Inside Your
Before Working Inside Your
Computer.
Computer.
31