Installing The Power-Switch Cable; Removing The System Fan - Dell OptiPlex 3010 Owner's Manual

8. Slide the power-switch cable out through the front of the computer.
Related Links

Installing the Power-Switch Cable

Installing the Power-Switch Cable
1. Slide the power-switch cable in through the front of the computer.
2. Secure the power-switch cable to the chassis.
3. Thread the power-switch cable into the chassis clip.
4. Connect the power-switch cable to the system board.
5. Install the drive cage.
6. Install the front bezel.
7. Install the cover.
8. Follow the procedures in
Related Links
Removing the Power Switch Cable

Removing the System Fan

1. Follow the procedures in
2. Remove the cover.
3. Remove the front bezel.
4. Remove the drive cage.
5. Remove the fan shelter.
6. Disconnect the fan cable from the system board.
22
After Working Inside Your
Before Working Inside Your
Computer.
Computer.