Iptv Cdr (Interface Mode); Iptv Max-Access - Zte ZXR10 8900 Series Command Reference Manual

ZXR10 8900 Series Command Reference (Voice and Video Volume)
Parameter
Description
Example
Related
Commands
Command
Function
Command Modes
Command format
Parameter
Description
Default
Configuration
Command
Function
Command Modes
Command format
46 Confidential and Proprietary Information of ZTE CORPORATION
Parameter
vlan
<channel-name>
<channel-idlist>}
deny|permit|previe
w|query
To permit user to access channel 1, execute the following com-
mands:
ZXR10(config)#interface gei_2/10
ZXR10(config-gei_2/10)#iptv vlan 1 service start
ZXR10(config-gei_2/10)#iptv vlan 1 control－mode channel
ZXR10(config-gei_2/10)#iptv vlan 1 channel id-list 1
permit
Iptv channel mvlan

iptv cdr (Interface Mode)

This specifies whether to generate CDR for user.
Interface configuration mode
iptv [vlan {<vlan-idlist>|<vlan-name>}] cdr {enable | disab
le}
Parameter
vlan
enable|disable
enable

iptv max-access

This sets the Max channel accesses for one user.
Interface configuration mode
iptv [vlan {<vlan-idlist>|<vlan-name>}] max-access <channe
l-num>
Description
This specifies to configure the command on a
vlan attribute of interface.
This is channel name.
This is idlist list. Multiple lists can be
configured at one time.
This applies channel right on interface.
Description
This specifies to configure the command on a
vlan attribute of interface.
This specifies whether to generate CDR for
user.