4.2.17 Registration roller Assy.
(1) Remove the control panel Assy. (see section 4.2.11).
(2) Remove the motor <see section 4.2.7 (8)>.
(3) Remove the cable.
(4) Remove the two (silver colored) screws
(5) Remove the connector
screws
the figure (Tool No. 1).
43170003TH Rev.2
from the high-voltage board and remove the six (silver colored)
to detach the registration roller Assy.
and the gear cover
(Tool No. 1).
by pulling it as shown by the arrow in
Oki Data CONFIDENTIAL
90 /