Setup Of Destination - Oki C8800 Maintenance Manual

• To specify the CU Serial Number, enter a number within 12 digits (Notice that, when the
CU Serial Number is read, it is also a number within 12 digits.)
• The CU Serial Number is output in the Printer Serial Number field of the Menu Map
header section. Therefore, after the CU Serial Number has been rewritten, it can be
checked by conducting the Menu Map print.
• The PU Serial Number is output in the Lot Number field in the bottom line of the Menu
Map header section.

5.4.3 Setup of destination

[Checking method: Menu Map Print ( C8800)]
The destination is set prior to shipping out of a maintenance PCB. (Maintenance PCBs area
available for each destination.) Basically, you don't need to change the destination settings.
The important information about settings will be cleared if you change the destination setting.
Note! This setting is stored on the EEPROM of the CU PCB.
1. Setup on the operation panel: Start the printer in the maintenance mode, and set the
destination.
• Turn on the power with the MENU+ and MENU- key held down.
• "Maintenance Menu" will be displayed briefly, which will change to "OKIUSER".
• Press the MENU+ key to select the destination setting "OKIUSER" and press the ENTER
key.
• "OEL" will appear in the lower line of the LCD.
• Press the ENTER key, select the destination by operating the MENU+ or MENU- key, and
press the ENTER key.
• Press the BACK key to define the setting. "OEL"
• Press the BACK key twice, or the ONLINE key once. This will cause the printer to restart
with the destination modified.
2. Explanation
C8800 are ROMs used in common for domestic and overseas markets.
This setting is stored on the EEPROM of the CU PCB.
When the version number of the program ROM is changed, the setting will be reset to the
default value.
43170003TH Rev.2
Enter 12-digit Serial Number. Enter "4AEL4011702K."
Ser.NO. 4AEL4011702K
Lot.NO. AE47027880 A0
Made in China
Configured in UK
Figure of Serial No. label image (labeled in UK Factory)
Oki Data CONFIDENTIAL
183 /