Invacare rea Spirea4 NG User Manual page 26

1-2.
B
A
Tool: 4 mm Allen key
10 mm socket spanner
C
26
Anti-tippers traditional
The anti-tip device is also used as a step tube. It is
easy to adjust the height.
1. Remove the plastic plugs from both the step tubes/
back frame parts. Push the anti-tip device into place
and screw tightly with the nut (A) and screw (B).
2. Pull the spring-loaded plastic washer back and slide
the anti-tip device to the desired position. Make
sure that the anti-tip device is secure in the new
position.
Always remember to activate the anti-tippers
again when you have had them deactivated.
Ultra low anti-tippers for seat height 36 cm
1. Remove the plastic plugs from the back frame
parts. Push button (C) and insert the anti-tipper.
Make sure the button (C) pops out into the hole
in the frame.
2. The anti-tippers can be de-activated by pushing
button (C) and turning the anti-tippers 180° so
that the anti-tipper wheel is pointing upwards.
Make sure that the button (C) pops out under-
neath.
Always remember to activate the anti-tippers
again when you have had them deactivated.