Table of Contents
Advertisement
Other Selections Designations
Item
Reading mode
Trigger signal input delay
time
Indirect mode one-shot
duration
Magic key control
Scanner sensitivity level
in Auto sensing mode
Beeper control
Reading error beeper
control
Beeper tone
Beeper beep time
Beeper volume
Indicator LED control
Beeper sound when
power turned ON
Illumination LED
Parameter
Direct trigger mode
Indirect trigger mode
Direct software trigger mode
Indirect software trigger mode
Continuous reading mode A
Continuous reading mode B
Auto sense mode
0～999ms
0.10～9.99s
Scanning ON/OFF function
No function
High
Medium
Low
Enabled
Disabled
Enabled
Disabled
Low-pitch tone:approx.2.6kHz
Medium-pitch tone: approx. 2.8kHz
High-pitch tone: approx. 3.0kHz
Short:60ms
Medium:80ms
Long:120ms
High
Medium
low
Enabled
Disabled
Enabled
Disabled
Always turns OFF
Automatically controls on/off
Always turns ON
Default Setting
0ms
1.00s
: Can be changed only with the configuration software.
96
Remarks
Chapter 7
Chapter 9.4
Chapter 7
Chapter 9
Section 9.1
Chapter 9
See 9.2
Chapter 9
Section 9.1
Chapter 9
Section 9.3
Advertisement
Table of Contents
