Setup - Life Fitness INTEGRITY SERIES M051-00K61-A137 Operation Manual

1.2 S
ETUP
Read the Operation Manual before setting up the Life Fitness Cross-Trainer.
W P L F ® C -T
HERE TO LACE THE IFE ITNESS ROSS RAINER
Follow all safety instructions in Section 1.1 and move the Life Fitness Cross-Trainer to the location in which it will be used.
See Section 7 for the dimensions of the footprint. Allow 1 foot of clearance in front of the Life Fitness Cross-Trainer to
allow for movement of the pedal levers. It should be easy to mount the Life Fitness Cross-Trainer from the side.
H S L F C -T
OW TO TABILIZE THE IFE ITNESS ROSS RAINER
After placing the Life Fitness Cross-Trainer in position, check the unit's stability by attempting to rock it. Any slight rocking
indicates that the unit must be leveled. Check the stabilizing feet to determine which foot does not rest fully on the floor.
Rotate the foot counter-clockwise to lower it. Recheck the stability and adjust again as needed until the Life Fitness
Cross-Trainer is stable and no longer rocks. Lock the adjustment into position by tightening the jam nut against the
stabilizer bar with an open end 9/16 inch wrench.
P I L F C -T
LUG N THE IFE ITNESS ROSS RAINER
The Life Fitness Cross-Trainer comes with a standard power supply for the U.S., or a universal power supply that will ac-
cept country-specific line cords.
Insert the power adapter jack into the barrel plug on the back of the Life Fitness Cross-Trainer. Then insert the power
supply into the wall outlet (A) (or the universal power supply if outside the U.S. (B). Make sure the cord is routed so that
it doesn't bind and will not be walked on.
Check that the console LEDs light up. If not, recheck the plug and wall connections and make sure the wall outlet
has power.
.
7