Tv Signal Amplifier; Exterior Cable Tv Connection - Winnebago Minnie Winnie 2015 Owner's Manual

Table of Contents

Advertisement

SECTION 8 –
ENTERTAINMENT
C AU T I ON
To avoid equipment damage, always
align directional handle to DOWN position
before lowering. Never partially raise or
lower antenna. Antenna must be raised
fully up into operating position or lowered
fully down into travel position.
TV ANTENNA
–If Equipped
The TV antenna on your motorhome is a
stationary omnidirectional design. The antenna
provides reception of VHF/UHF TV channels. A
built-in signal amplifier designed to strengthen
signals, is controlled by a power switch built into
the optional video selector panel or on a wall
plate assembly.
WARNING
Never allow the antenna to touch
electrical power lines or any other
electrical wires. Death or serious injury
can occur.
Further Information
See the antenna manufacturer's operation,
care, and maintenance information in your
InfoCase.

TV SIGNAL AMPLIFIER

The TV Signal Amplifier is built into the
antenna and can be turned on or off with a power
switch.
An indicator light will illuminate when the
switch is on and the signal amplifier is active.
8-4
TV Signal Amplifier Power Switch
(Located in an overhead cabinet or mounted
on a wall near the TV)
-Typical View
EXTERIOR CABLE TV
CONNECTION
The exterior cable TV connection receptacle
on your coach provides connection for use of a
TV for your outdoor entertainment..

Exterior Cable TV Connection

(Located near entrance door)
-Typical View
• Power
Switch

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents