Controlling The Temperature - Samsung RH56J69 Series User Manual

Free standing appliance
Hide thumbs Also See for RH56J69 Series:
Table of Contents

Advertisement

Operating
Display Off Function
To energy conservation the Panel Display
turns off automatically under the following
conditions:
When no button has been pressed, when
no doors are open, or when no Dispenser
Lever has been pushed.
However, the icon indicating your Vacation
or Cubed / Crushed / Ice Off, will stay on.
When you press a button, open a door, or
push Dispenser Lever, the Panel Display
will turn on again.
Except for the Ice Type button, all function
buttons will become operational after you
remove your finger from the button you
are currently pressing.

Controlling the temperature

Controlling the Freezer temperature
The freezer temperature can be set
between -15 °C and -23 ºC to suit your
particular needs. Press the Freezer button
repeatedly until the desired temperature is
shown in the temperature display. Keep in
mind that foods like ice cream may melt at
-16 ºC.
The temperature display will move
sequentially from -15 °C and -23 ºC. When
the display reaches -23 ºC, it will begin
again at -15 ºC.
Five seconds after the new temperature is
set the display will again show the actual
current freezer temperature. However, this
number will change as the Freezer adjusts
to the new temperature.
40 English
DA68-03176A (EN)-00.indd 40
DA68-03176A (EN)-00.indd 40
NOTE
Bottom drawer in freezer is two star
section.
The Bottom door guard and Middle door
guard in ther freezer are two star section.
So, the Temperature in the two star
sections are slightly higher than other
freezer compartment.
Controlling the fridge temperature
The refrigerator temperature can be
set between 7 ºC and 1 ºC to suit your
particular needs. Press the Fridge button
repeatedly until the desired temperature is
shown in the temperature display.
The temperature control process for the
Fridge works just like the Freezer process.
Press the Fridge button to set your desired
temperature.
After a few seconds, the Fridge will
begin tracking towards the newly set
temperature.
This will be reflected in the digital display.
NOTE
The temperature of the freezer or the
refrigerator may rise from opening the
doors too frequently, or if a large amount
of warm or hot food is placed in either
side.
This may cause the digital display to blink.
Once the freezer and refrigerator return to
their normal set temperatures the blinking
will stop.
If the blinking continues, you may need to
"reset" the refrigerator.
Try unplugging the appliance, wait about
10 minutes and then plug back in.
2015. 1. 14.
2015. 1. 14.
2:50
2:50

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents