Pioneer inno xm2go User Manual page 50

Using inno with a PC
4. Reboot your PC if necessary, then launch the XM+Napster program from the shortcut on
your desktop.
5. Set up inno as shown and plug the USB cable into the PC. You can also connect the USB
cable directly between your PC and inno without using the home dock, home antenna,
and AC power adapter.
Only use the USB cable supplied in the package. Other USB cables may not allow
WA R N I N G :
your inno to charge its battery or communicate with your PC.
6. Your PC should recognize inno. Close any file folders that appear on your screen. You can
manage the contents of inno entirely by using the XM+Napster program.
7. When taking your inno with you, you must disconnect inno from the PC by following the
procedure described in "Disconnecting Your inno from the PC" (page 60).
50 Using inno with a PC