Pioneer inno xm2go User Manual page 25

5. To install the vent mount, find a horizontal vent that is strong enough to hold your inno
and dock. To remove the vent mount, push it into the vent and lift upwards slightly to
release the mount's hooks from the vent vane.
6. Find an unused FM frequency on your car stereo.
7. Set your inno to the same FM frequency. (Refer to the section marked "Settings," "FM
Frequency.")
8. Tune inno to XM channel 1. You should be able to hear XM through your car stereo.
Using Your inno Alone
Using Your inno Alone 25