Setup - Pioneer inno xm2go User Manual

Setup

We recommend reading this entire section before using your inno with a PC.
To connect your inno to your PC:
1. If you haven't done so already, disconnect your inno and its dock from your PC.
2. Insert the XM+Napster CD into your computer's CD or DVD drive.
3. The software should start automatically. You should see the following screen on your PC:
Follow the directions indicated on the screen. If you have any questions about the
XM+Napster software, see the XM+Napster FAQs at http://napster.xmradio.com.
Using inno with a PC
Click here to begin the
installation.
Click here when you're
finished with the
installation procedure.
Using inno with a PC 49