Kenwood DV-403 Service Manual page 11

2-14 Disassembling the Intermediate Chassis
1. Push the stopper downward, then rotate it until it contacts
the Vertical cam.
2. Release the 2 tabs.
2-15 Disassembling the Vertical cam and Drive
gear
1. Rotate the Vertical cam until it reaches the contact posi-
tion.
2. Lift the Vertical cam straight upward to pull it out.
3. Remove the Drive gear.
DISASSEMBLY FOR REPAIR
2-16 Disassembling the Pulley Gear and Decelera-
tion Gear
1. Remove the screw.
2. Remove the pulley gear.
3. Remove the belt.
4. Remove the deceleration gear.
2-17 Disassembling the Mechanism Loading
C.B.A.
1. Remove the 2 screws.
2. Remove the 2 screws.
3. Release the three tabs.
DV-403
11