Pbx Settings; Lcd Settings - NEC Inaset R2 User Manual

3-4 INASET R2 Setup
Figure 3-3 LCD Setting- Back Light Level window

PBX Settings

Changes to the PBX feature should be made by the system
administrator or a qualified NEC technician.

LCD Settings

Back Light Level
Follow the steps to adjust the display back light level.
Start the Setup application as described at the beginning of this chapter.
Step 1
At the Setup menu, use the cursor key to select LCD and press the
Enter key.
Again use the cursor key to select Back Light Level and press the Enter
Step 2
key. The LCD Setting Back Light Level window displays
Press the function key for the desired level of display back light. Press
Step 3
the function key for OK when complete.
When all changes have been made, press the function key for Save to
Step 4
save your settings.
Press the function key for OK to confirm that you really want to save your
Step 5
settings. Your display settings have now been changed.
(Figure
INASET R2 User Guide - Revision 1
3-3).