Services Controlled By The "Main" Software Key - Alcatel-Lucent OmniPCX Office Installation Manual

Chapter
3
3.3.1

Services controlled by the "Main" software key

The following table lists the functions controlled by the "Main" software key. If a software key is
not present in the system, or is incorrect, the system starts in a limited state. The table also
gives the limited state service levels, the granularity of upgrades, the maximum service level
for each service, and if a hardware extension exists.
Controlled services
STANDARD TELEPHONY
Number of digital sets
Number of analog sets
MOBILITY
Number of DECT sets
Number of DECT sets (with IP DECT) From R9.0 0
Number of Mobile IP Touch sets
CALL MANAGEMENT
ARS
DISA/Transit DISA
ISVPN on ISDN (ARS required)
QSIG + (ARS required)
Number of Meet Me Conference
Enhanced Automated Attendant
(EAA)
NETWORKS
Number of B-channels
Number of B-channels on MIX boards From R4
WEB APPLICATION
Number of My IC Web for Office
sessions
SNMP
SNMP activation
RAS
number of access (b channels)
LAN TELEPHONY
3-4
Relevant Values in
software limited
version mode
All According to
selected
All
model
All 0
From R5.0 0
All open in
R1.0/R1.1,
All
closed from
R2
All closed
All closed
From R5.1 0
From R6.0 0
All 0
0
From R8.1 0
From R2.1 closed
From R2 0
Modularity Max
+1 236
+1 236
+1 200
+1 50
+1 120
open
open
open
open
+ 1 1
+ 1 5
+1 120
+2 120
1 from
R8.1: 50
from
R9.0: 50
opened
+2 16
Hardware
extension
NO
NO
NO
NO
Yes
From R8.0:
No