Alcatel-Lucent OmniPCX Office Installation Manual page 154

Chapter
4
4.13.1.2.2 Attaching the handset cable:
- Turn the terminal
- Plug in the handset cable (connector
4.13.1.2.3 Wall mounted
Preparing Premium Reflexes terminals
- Turn the terminal
- Use a screwdriver to remove the two upper rubber feet.
Preparing Advanced Reflexes terminals
- Turn the terminal
- Use a screw driver to remove only the left rubber foot.
Mounting the terminal
- Use the bracket as a drilling template; use the wallplugs and screws provided to attach the
bracket.
- Attach the terminal using the two lugs: introduce the lugs into the holes previously
occupied by the feet (left foot and hole intended for this purpose for Advanced Reflexes
terminals).
4-106
) into the guide intended for this purpose.