Using The Alarm Clock; Setting The Current Time; Setting The Alarm Clock - Uniden UBC330CRS Owner's Manual

Your scanner's Clock displays whenever you turn off the radio functions. It can
also be used as a standard alarm clock.

Setting the Current Time

Follow the steps to set the current time:
1. Move the slide switch to
The hour digits flash.
2. Press or
s t
hour increments or press the number keys to
select the present hour. Then press
to set the hour. The minutes digits flash.
3. Press or
s t
appropriate number keys to enter the minutes. The seconds reset to 00.
E/PGM
Press
4. Press or
s t
switch to Clock. The scanner exits the clock setting mode.

Setting the Alarm Clock

Follow these steps to set the alarm time:
1. Move the slide switch to
The hours digits flash.
2. Press or
s t
increments or press the number keys to select
the present hour. Then press
the hour. The minutes digits flash.
3. Press or
s t
one minute or press the appropriate number
keys to enter the minutes. Press
display icon flashes.
4. Press or
s t
your selection. To lock in the alarm time, move the slide switch
Clock
to .

Using the Alarm Clock

Clock Set
to change the hour by one
to change the minute setting by one minute or press the
AM/PM
, flashes.
to select AM or PM. To make your selection, move the slide
Alarm Set
to change the hour by one hour
to change the minute setting by
to move from AM to PM and back. Press
.
E/PGM
.
E/PGM
to set
E/PGM
to set the minutes. The
E/PGM
Using the Alarm Clock
AM/PM
to make
16